TM 9-2330-297-14&P
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
9.
Screws (1),
Using cross-tip screwdriver, remove six
washers (2) and
screws (1) and washers (2) Separate
covers (3) and (4)
cover (3) from cover (4)
10.
Gears (5) and (6),
a. Pull gears (5) and (6) with shafts (7)
and shafts (7)
and (8) out of cover (4).
and (8)
b. Using pliers, remove detent clip (9).
c. Using hammer and punch, remove groove
pins (10) and (11).
d. Remove gears (5) and (6) from shafts
(7) and (8).
ASSEMBLY
11.
Gears (5) and (6)
a. Slide gears (5) and (6) onto shafts (7)
shafts (7) and (8),
and (8).
groove pins (10)
b. Using hammer and punch, install pins
and (11) and detent
(10) and (11).
clip (9)
c. Using pliers, install detent clip (9) on
shaft (8).
12.
Shafts (7) and (8),
a. Using GAA grease, lubricate gears (5)
covers (3) and (4),
and (6) and shafts (7) and (8).
washers (2) and
b. Slide shafts (7) and (8) through
screws (1)
cover (4).
c. Place cover (4) on cover (3).
d. Using cross-tip screwdriver, install
washers (2) and screws (1).
4-94