TM 9-2330-297-14&P
AXLE BEAM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
2.
Bogie
Nuts (1), washers
a. Using hydraulic jack, support axle
(2), bolts (3) and
beam (5).
b. Using 1 112-inch socket, remove two
nuts (1), two washers (2), and two
bolts (3).
3.
Nuts (6), washers
Using 1 5/16-inch socket, remove eight
(7) and bottom
nuts (6), eight washers (7), and two bot-
plates (8)
tom plates (8).
4.
U-bolts (9), top
a. Remove four U-bolts (9), two top
plates (10) and
plates (10) and two liners (11).
liners (11)
b. Using hydraulic jack, lower axle
beam (5).
c.
Remove axle beam (5) out from under
chassis.
INSTALLATION
5.
Bogie
Axle beam (5),
a. Position beam (7) under chassis.
liners (11) and
b. Using hydraulic jack, raise axle beam
two top plates (10) (5) to springs (12).
Center axle beam (5) to bogie.
c.
Place two liners (11) and two top plates
(1D) on springs (12).
TA223177
5-4