TM 9-2330-297-14&P
SPRING LEAF - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
6.
Axle beam
Spring leaf (1)
Install.
a.
Place spring leaf (1) over hi-seat (2)
with tapered end forward.
Use assistant to lift spring leaf (1).
b.
Seat stud (3) in hole on hi-seat (2).
7.
Axle beam
Liner (4), top
a. Place liner (4) and top plate (5) on
plate (5) and spring leaf (1).
U-bolts (6) b. Position two U-bolts (6) over top
plate (5).
8.
Bottom plate (7),
a. Place bottom plate (7) under axle beam
washers (8) and
and aline U-bolts (6) through holes.
nuts (9)
b. Using 1 5/16-inch socket, install four
washers (8) and four nuts (9).
c.
Using torque wrench, torque nuts (9) to
200 - 225 ft lb (271.2 - 305.1 Nm)