TORQUE VALUES - CONTINUED
Always use the torque values listed above when specific torque values are not
Do not use above values in place of those specified in other sections of this manual; special attention should be
observed when using SAE Grade 6, 7, and 8 capscrews.
The above is based on use of clean, dry threads.
Reduce torque by 10 percent when engine oil Is used as a lubricant.
Reduce torque by 20 percent if new plated capscrews are used.
Capscrews threaded into aluminum may require reductions in torque of 30 percent or more of Grade 5 capscrews torque
and must attain two capscrew diameters of thread engagement.