TM 9-2330-356-14
d. Starter Switch. Engages starter motor to turn and
j. Oil Pressure Gage. Indicates pressure in engine
start the engine. (Engine switch, item b, must be in RUN
lubrication system. Normal indication is 30-40 psi when
position.)
engine is warm and running.
k. Fuel Pressure Gage. Indicates pressure in the fuel
e. Voltmeter. Indicates battery operating voltage.
injection system. Normal indication is 1214 psi.
Normal indication is 12-14V with engine running.
l. Filter/Separator Gage (M969, M969A1, M970,
M970A1). Indicates amount of restriction in filter/
used with either Flow Rate/rpm data plate (para 1-11) or
g. Hourmeter. Indicates engine running time.
NOTE
Pressure will vary. The engine speed, type of
h. Engine Throttle. Controls and sets engine speed.
operation, and nozzles used have a direct
Pull the handle out to the selected setting, then rotate it
effect on pump pressure.
clockwise to lock it in position.
m. Pump Pressure Gage. Indicates pressure in the
i. Control Panel Light. To illuminate the control
pump discharge line. Normal operating pressure is 30 psi
panel, activate the light switch at the bottom of the light.