TM 9-2330-356-14
NOT use near open flame or excessive heat.
WARNING
The solvent's flash point is 100F-138F
(38C-59C). If you become dizzy while
Dry cleaning solvent P-D-680 is toxic and
using cleaning solvent, immediately get fresh
ftammable. Always wear protective goggles
air and medical help. If solvent contacts eyes,
and gloves, and use only in a well-ventilated
immediately wash your eyes with water and
area. Avoid contact with skin, eyes, and
get medical aid.
clothes, and DO NOT breathe vapors. DO
NOT use near open flame or excessive heat.
(2) Cleaning and Inspection. Clean with
The solvent's flash point is 100F-138F
(38C-59C). If you become dizzy while
surfaces of valve for physical damage.
using cleaning solvent, immediately get fresh
air and medical help. If solvent contacts eyes,
(3) Installation. Install valve and attach with
immediately wash your eyes with water and
sixteen washers, sixteen nuts, and eight studs. Tighten
get medical aid.
nuts securely.
(2) Cleaning and Inspection. Clean with dry
d. Angle Valve and Check Valve (M969, M969A1,
and valves.
(1) Removal.
(3) lnstallation. Install valves and new gaskets
and attach with bolts, washers, and nuts, or split couplings
(a) Remove coupling at rear of check valve.
Tighten valve mounting bolts to 25-35 lb.-ft.
(b) Remove four capscrews, washers, and
nuts from bottom of angle valve.
c.
(1) Removal. Remove sixteen nuts, sixteen
washers, and eight studes. Remove valve.
TA502363
WARNING
Dry cleaning solvent P-D-680 is toxic and
flammable. Always wear protective goggles
TA502364
and gloves, and use only in a well-ventilated
area. Avoid contact with skin, eyes, and
M969A1, M970, and M970A1).
clothes, and DO NOT breathe vapors. DO