TM 9-2330-356-14
Figure 5-10. Pump Installation, 4-Inch {Also Typical of
3-Inch Pump).
(6) Install batteries and connect battery cables
(2) Remove pump assembly from engine
NOTE
washers (28), ten capscrews (27), and top panel (26).
The pump Is self-priming. Filling the pump is
necessary only when the pump has been
(4) Tag and disconnect wiring harness and
drained.
(7) Ensure that drain plug is installed at bottom
(5) Remove fuel lines from fuel tank and engine
of pump. Remove filler plug near top of pump and fill
pump with fuel that is to be pumped. Install filler plug,
(6) Remove air cleaner hose from engine intake
bracket can be removed with the engine fan shroud.
a.
Removal.
(1) Remove engine and pump as a unit from the