TM 9-2330-356-14
(3) Connect electrical leads and conduit to motor
5-24. Hose Reel Assembly- 1-inch and 1
-inch
junction box as tagged. Install cover on junction box.
( 4 ) Install hose assembly on hose reel
a.
Removal.
(1) Remove hose reel cabinet from semitrailer
(5) Install hose reel cabinet to semitrailer
(2) Remove hose assembly from hose reel using a
5-25. Meter Assembly (M969 and M969A1)
(3) Remove cover on motor junction box. Tag and
a.
Removal.
disconnect electrical leads and conduit from motor
junction box.
(1) Remove split couplings on meter inlet and
outlet lines. Slide the coupling gaskets towards the meter
(4) Remove split coupling to disconnect hose reel
to expose the joint in the piping.
from meter (M969 and M969A1) or gate valve P (M970
(2) From under cabinet, remove three mounting
and M970A1).
screws. Use a suitable lifting device and remove meter.
(5) Remove mounting screws, washers, and nuts.
(3) Remove flanged connections from meter
TWO people can then lift the hose reel from the cabinet.
inlet and outlet after meter is removed from cabinet.
Installation.
b.
Discard gaskets from flanges.
(1) Have two people position hose reel in
b.
Installation.
cabinet. Install mounting screws, washers, and nuts.
(1) Use new gaskets, and install flanged
Tighten nuts to 25-35 lb.-ft.
connections on inlet and outlet ports of meter. Tighten
four nuts on each flange to 50-75 lb.-ft. Install gaskets for
coupling to 57-63 lb.-ft.
Figure 5-15. Hose Reel Cabinet Assembly, (M969 and M969A1) Roadside View.