TM 9-2330-356-14
TA157205
(2) Install valve assemblies (14) into body. Using
(8) Remove eight balls (8) from lock sleeve (1).
needle nose pliers, move springs (13) into position from
outside of valve. Aline holes and install two pins (12).
(9) Remove ring (9) securing sleeve (10) to body
(7).
(3) Install two packings (11) to body.
(10) Slide sleeve (10) off body (7).
(4) Slide sleeve (10) onto body and secure with
ring (9).
(11) Remove two packings (11) from body.
(5) Install eight balls (8) into lock sleeve (10) and
(12) Remove two pins (12) securing two springs
then install lock sleeve (10) onto body.
(13) to two valve assemblies (14).
(6) Install three retainers (6) into body (7).
(13) Remove two springs (13) and valve assemblies
(14).
(7) Install spring (5).
(14) Remove bumper (15) and packing (16) from
(8) Install bumper (4) on sleeve assembly (2) and
body (7).
then install sleeve on body.
c.
(9) Install ring (3).
(1) Install packing (16) and bumper (15) on body
d.
(7).
8-37/(8-38 Blank)