TM 9-2330-357-14&P
4-25. LOWER OUTRIGGER LIMIT SWITCH MAINTENANCE (Con't).
11.
switch connectors (7).
12.
Connect two switch connectors (7) as tagged,
to harness connectors.
13.
Set outrigger control panel power switch to
ON position and raise outrigger.
14.
automatically.
NOTE
Screw length is checked from top of ball nut to top of screw. DO NOT Include rod end
nut In check.
15.
Check length of screw (9) with switch
adjustment tool (10).
16.
If length is not correct, repeat steps 4 through
15 until length is correct.
TA706455
4-40