TM 9-2330-357-14&P
4-32. SERVICE BRAKE MAINTENANCE (Con't).
_________
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake components unless area has
been properly cleaned. There may be asbestos dust on these components which can be
dangerous if you touch it or breathe it. Wear an approved filter mask and gloves. Never
use compressed air or a dry brush to clean brake components. Dust may be removed
using an industrial-type vacuum cleaner. Clean dust or mud away from brake
components with water and a wet, soft brush or cloth. Failure to follow this warning
may result in serious illness or death to personnel.
a. REMOVAL
NOTE
Note location of all components during removal to aid In installation.
Perform steps 1 and 2 If replacing brakeshoes only.
1.
Remove both brakeshoe return springs (3)
with brake springtool.
2.
Remove two brakeshoes (1) from brake
assembly (2).
TA706467
4-55