TM 9-2330-357-14&P
5-11. OUTRIGGER ACTUATOR ASSEMBLY REPAIR (Con't).
34.
Install gear housing cover (4) straight down onto gear housing (6), using dowel pin for alinement, and tap
until gear housing cover is firmly seated against gasket (8).
NOTE
When Installing socket head screws, leave loose until ready to torque in sequence.
Install 23 socket head screws (5). Torque larger socket head screws to 435 Ib.-in. (49 N ) and smaller
35.
m
socket head screws to 114-124 lb.-in. (13-14 N ) in torque sequence illustrated.
m
36.
Apply film of grease to seal diameter on
manual drive shaft and install new seal (7),
closed face out, tapping with arbor adapter
until seal bottoms against shoulder in gear
housing cover (4).
5-45