TM 9-2330-357-14&P
5-11. OUTRIGGER ACTUATOR ASSEMBLY REPAIR (Con't).
CAUTION
While drilling seal, DO NOT damage threads of hole in ball nut.
46.
Drill Y64 in. hole through steel shell of seal
(49), using threaded hole in ball nut (29)
nearest return tube clamp (51).
47.
Install seal screw (48) into ball nut (29) and
tighten until seated in seal (49).
48.
Install new lockwire (50) onto ball nut (29).
NOTE
If ice scraper cannot be started on ball screw thread, remove ice scraper and rotate 180
.
49.
Rotate ball nut (29) % in. past end face of ball screw (44) and install two ice scraper pins (46) and ice
scraper (45) into ball nut. Turn ball nut clockwise to bring ball screw through ice scraper.
5-47