TM 9-2330-357-14&P
5-11. OUTRIGGER ACTUATOR ASSEMBLY REPAIR (Con't).
50.
Apply grease to entire length of ball screw (44).
51.
to threads of ball nut (29).
52.
Place ball screw subassembly (27) in horizontal
jig. Install ball screw (44) into extension cover
(31). Thread ball nut (29) into position and
tighten securely.
CAUTION
DO NOT damage threads of hole In extension cover.
53.
Drill complete Y4 in. drill bit point into ball nut (29) threads using threaded hole (52) in extension cover
(31) as locater hole.
54.
Install setscrew (28) into extension cover (31) and tighten until seated in ball nut (29).
5-48