TM 9-2330-357-14&P
(8) In the Special Tools List section, the Basis of Issue (BOI) appears as the last line(s) In the entry
for each special tool, special TMDE, and other special support equipment. When density of equipments
supported exceeds density spread Indicated in the Basis of Issue, the total authorization is increased
proportionately.
(9) The statement "END OF FIGURE" appears Just below the last Hem description In Column 5 for
f. QTY column (6) The QTY (quantity per figure) column- indicates the quantity of the item used In the
breakout shown on the illustration/figure, which is prepared for a functional group, subfunctional group, or an
assembly. A "V" appearing in this column in lieu of a quantity indicates that the quantity invariable and the
quantity may vary from application to application.
a. National Stock Number (NSN) Index .
(1) STOCK NUMBER column. mis column lists the NSN by National Item Identification Number
(NIIN) sequence. The NIIN consists of the last nine digits of the NSN (i.e.,
NSN
5305-01-674-1467). Yemen using this column to locate an item, Ignore the first 4 digits of the NSN. Howev-
NIIN
er, the complete NSN should be used when ordering Items by stock number.
(2) FIG. column. This column lists the number of the figure where the item is identified/located.
(3) ITEM column. The item number identifies the item associated with the figure listed in the
adjacent FIG. column. This item is also identified by the NSN listed on the same line.
b. Part Number Index. Part numbers in this index are listed by part number In ascending
alphanumeric sequence (i.e., vertical arrangement of letter and number combination which places the first letter
o! digit of each group in order A through Z. followed by the numbers 0 through 9 and each following letter or
digit in like order).
(1) CAGEC column. The Commercial and Government Entity (CAGE) Code (C) is a 5-digit
alphanumeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the
item.
(2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which controls the design and characteristics of the item by means
of its engineering drawings, specifications standards and inspection requirements to identify an item or range of
items.
(3) STOCK NUMBER column. This column lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and CAGE columns to the left.
(4) FIG. column. This column lists the number of the figure where the item is identified/located
in Section 11 and Section lilt
(5) ITEM column. The item number is that number assigned to the item as it appears in the
figure referenced in the adjacent figure number column.
c. Figure and Item Number Index .
(1) FIG. column This column lists the number of the figure where the item is identified/located In
Sections II and lilt
(2) ITEM column. The item number Is that number assigned to the item as it appears in the
figure referenced in the adjacent figure number column.
(3) STOCK NUMBER column. This column lists the NSN for the item.
F-5