TM9-2330-358-14&P
2-2.
FLOAT PADS (GROUND BOARD ASSEMBLIES )
a. Two float pads (1, fig. 2-2) are provided for placing under landing leg feet
to keep them from sinking into soft ground.
b.
Stored in brackets (2) welded to frame.
Float pad chain (3) is welded to the frame.
c.
Figure 2-2.
Float Pad (Ground Board Assembly)
2-3.
CHOCK BLOCKS
a.
One chock block (1, fig. 2-3) located on each side of semitrailer.
b. Depending upon the terrain, place chock blocks (1) firmly behind or forward
of wheels on each side of the semitrailer.
c. Helps keep semitrailer from moving when towing vehicle is unhooked or when
the unit is parked on a hill.
d. Chain (2) holds chock block (1) to semitrailer to keep it from being lost.
e.
Stowage bracket (3) stows chock block (1) when not in use.
Figure 2-3.
Chock Block
2-2