TM9-2330-358-14&P
LANDING GEAR LEGS
3-6.
This task covers:
Cleaning
INITIAL SETUP
Materials/Parts
a. Use a soft cloth to remove any buildup of grease and dirt (fig. 3-4).
WARNING
Dry cleaning solvent (PD-680) is both toxic and
flammable. Avoid prolonged breathing of vapors. Avoid
skin contact. Use only in a well ventilated area.
Keep away from open flame. Flash point of solvent is
138F (59C).
b. Use a small brush and dry cleaning solvent (PD-680) to thoroughly clean
landing gear leg.
c.
Allow to dry.
Figure 3-4.
Landing Gear
TASK ENDS HERE
3-11