Organizational Troubleshooting Table
TEST OR INSPECTION
Check for moisture in air reservoirs.
Open drain cocks for drainage of moisture from air reservoirs.
If no moisture is present, go to step 2.
Check brake adjustment.
If brakes are out of adjustment, adjust slack adjusters (para.
If brakes are not out of adjustment, go to step 3.
Check for grease on brake lining.
If grease is not present, go to step 4.
If wheel bearings are not loose or worn, go to step 5.
Check for cracked, scored, or deformed brake drum.
If brake drum is scored, notify Direct Support/General Support
If brake drum is not defective, go to step 6.
Check for loose or worn brake lining.
If brake lining is loose or worn, notify Direct Support
If brake lining is not loose or worn, go to step 7.
Visually check for broken or frozen camshaft roller.