TM9-2330-358-14&P
Removal.
a.
(1) Tag and disconnect air line connected between air reservoirs (M871A1) being
removed.
(2) Remove four nuts (2, fig. 4-35), eight washers (3), and four bolts (4) from
bracket (5) (welded to air reservoir).
(3) Remove air reservoir (1).
(4) Remove drain cock (6) and fittings from air reservoir (l).
b.
Installation.
(1) Install drain cock (6, fig. 4-35) and fittings on air reservoir (l).
(2) Line up holes in air reservoir brackets (5) with holes in frame (6).
(3) Secure air reservoir (1) with four bolts (4), eight washers (3) and four
nuts (2).
(4) Install air line between air reservoirs (M871A1).
Air Reservoir
Figure 4-35.
(5) Install emergency relay valve (M871 if applicable) (para. 4-34) or multi-
(6) Close drain cocks.
(7) Pressurize air brake system when both air reservoirs are installed.
(8) Check for leaks.
TASK ENDS HERE
4-66