TM9-2330-358-14&P
The valve stem must be 180 degrees
(2) Install wheel (2) and ten lug nuts (l).
Torque lug nuts to 400-450 lb ft
from the valve stem of the inner wheel.
(542-612 Nm).
(3) Remove jack stands and lower semitrailer.
(4) Remove chock blocks and stow in brackets.
TASK ENDS HERE
4-46.
TIRES AND TUBES
Refer to TM 9-2610-200-24 for tire and tube removal, repair and installation.
TASK ENDS HERE
4-47.
BRAKE DRUM AND HUB
This task covers:
Removal
Installation
Adjustment
INITIAL SETUP
Tools
General mechanics tool kit and common supplement 11
Equipment Condition
Materials/Parts
Gasket, Hub Cap
Removal.
a.
CAUTION
Be certain which model semitrailer you are working on.
only. Callout 16 is on the M871A1 semitrailer only.
(1) Remove six screws (1, fig. 4-43), six washers (2), hub cap (3) and gasket
(4) . Discard gasket (4).
4-79