TM9-2330-358-14&P
(2) Grind weld off frame surface.
(3) Remove chain (1) from chock block (2).
(4) Repeat steps 1 through 3 for other chock block as needed.
Figure 4-45. Chock BlOCK
b.
Installation.
(1) Position chock block chain (1, fig. 4-45) on frame according to markings.
WARNING
Wear welding mask, gloves, and apron when welding or
using cutting torch. Failure to wear adequate
protective clothing may result in serious injury.
Refer to TM 9-237.
(2) Weld chock block chain (1) to frame using arc welder.
(3) Install chain (1) on block (2).
(4) Stow chock block (2).
(5) Repeat steps 1 through 3 for other chock block as needed.
TASK ENDS HERE
4-84