RETRACTABLE TWIST LOCKS
This task covers:
General mechanics tool kit
(1) Lower lock.
(2) Drive out pin (1, fig. 4-46) and remove lower assembly (2) by turning
(3) Remove upper assembly (3) , taking care not to separate locator block and
(1) Upper assembly.
Take care in separating locator block and bayonet to
prevent loss of balls and springs.
(a) Remove setscrew (1, fig. 4-47), spring (2) and ball (3).
(b) Separate locator block (4) and bayonet (5).
(c) Remove ball (6) and spring (7).
(2) Lower assembly.
(b) Remove handle (2) and two spacers (3) from base cap (4).
Repair is by replacement of assembly only.