TM9-2330-358-14&P
g. Drive-- Shaft Installation.
--
NOTE
The washer (6) is on the M871 semitrailer only.
(2) Install bolt (7), washer (6) and nut (5) to secure coupling (8) to right
landing leg.
h.
Left Landinq Leq Installation.
NOTE
The left landing leg is the side without the gear box.
NOTE
On the M871A1 semitrailer, install ten bolts (8) and
nuts (6).
(1) Install left landing leg (9, fig. 4-56) and secure with eight bolts (8),
washers (7) and nuts (6). Torque nuts to 150-160 lb ft (204-218 Nm).
NOTE
On the M871A1 semitrailer, secure braces with four
bolts (3) and nuts (l).
(2) Install braces (4 and 5) and secure with four bolts (3), washers (2) and
nuts (l). Torque nuts to 150-160 lb ft (204-218 Nm).
NOTE
The washer (2) is on the M871 semitrailer only.
(3) Install bolt (3, fig. 4-55), washer (2) and nut (1) on coupling (4).
i . Gear Installation (M871).
NOTE
The gear box on the M871A1 semitrailer is welded to the
landing leg.
(1) Install gear box (4, fig. 4-54) on landing leg (5).
(2) Install four bolts (3), washers (2) and nuts (l).
(3) Install bolt (8), washer (7) and nut (6) on coupling (9).
4-97