TM9-2330-358-14&P
b.
Installation.
(1) Place suspension bumper (4, fig. 4-58) into position.
(2) Install two washers (3), bolts (2) and nuts (l).
(3) Repeat steps 1 and 2 for other suspension bumpers as needed.
TASK ENDS HERE
Section XI.
MAINTENANCE OF THE BODY
Page
Chassis Bulkhead Assembly . . , .. . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 4-101
Document Box ........... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-106
Floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4- 105
Mud Flaps . . . . . . . . . . . . . . . . .... .... . . . . .. . . . . . . . . . . . . . . . . . . . . . . . .. . . 4-104
Side Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-103
4-58.
CHASSIS BULKHEAD ASSEMBLY
This task covers:
Removal
Installation
INITIAL SETUP
Tools
General mechanics tool kit
a.
Bulkhead Removal.
NOTE
On the M871A1 semitrailer, remove 11 nuts (l), washers
(2) and bolts (3) from bulkhead (4).
(1) Remove nine nuts (1, fig. 4-59), washers (2) and bolts (3) from bulkhead
(4) .
Due to tight fit it may be necessary to pry bulkhead
(4) from frame.
(2) Remove bulkhead (4).
4-101