TM9-2330-368-14 & P
Table 3-1. Operator Troubleshooting Table (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TIRES
1. EXCESSIVELY WORN OR SCUFFED TIRES OR FLAT SPOTS ON TIRES.
Step 1.
Check tire pressure.
a. If tire pressure is less than 85 psi (4.07 KPa), inflate tires to 85 psi (maximum).
b. If tire pressure is 85 psi, proceed to step 2.
Step 2.
Check for loose, cracked, or broken wheels.
a. If wheel nuts are loose, tighten nuts.
b. If wheel is cracked or broken, replace with spare wheel and tire (para. 3-6).
c. If wheel is secure and not cracked or broken, proceed to step 3.
Step 3.
Check suspension system for damaged rubber bushings, springs and loose or missing
bolts and nuts.
a. If suspension system is damaged or has loose or missing bolts and nuts, notify
organizational maintenance.
b. If suspension system is not damaged and all hardware is complete and secure, and
problem still exists, notify organizational maintenance.
3-8