TM 9-2330-371-14&P
Section Il. LUBRICATION INSTRUCTIONS
Page
Page
Lubrication Instructions . . . . . . . . . . . . . . . . . . 4-5
Lubrication Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
LUBRICATION INSTRUCTIONS
GENERAL. Keep all lubricants in closed containers and store in a clean dry place away from external
heat. Keep container covers clean and allow no dust, dirt, or other foreign material to mix with the
lubricants. Keep all lubrication equipment clean and ready for use.
CLEANING. Keep all external parts not requiring lubrication free of lubricants. Before lubricating the
equipment, wipe all lubrication points free of dirt and grease. Clean all lubrication points after
servicing to prevent accumulation of foreign matter.
LUBRICATION INTERVAL. Service the lubrication points at the proper intervals as specified in the
lubrication chart. The intervals specified are based on operation under normal conditions.
Modification of the recommended intervals may be required under unusual operating conditions.
LUBRICATION CHART
a. For lubrication under normal conditions, see lubrication chart on the following page.
b. For instructions on lubrication in weather below 0F (-18QC), refer to TM 9-207.
c. For lubrication before and after fording, refer to TM 9-238.
d. After operating in mud, dust, sand, or other unusual conditions, clean and inspect
all lubrication points. Lubricate semitrailer in accordance with the lubrication
chart.