TM 9-2330-371-14&P
Page
Page
Lead Assembly (Receptacle) .. . . . . . . . 4-34
Clearance
Light Assemblies . . . . . . . . . 4-29
Wire Connector . . . . . . . . . . . . . . . . . . . . . . . . 4-59
Composite
Light Adapter
Wire Harness. . . . . . . . . . . . . . . . . . . . . . . . . 4-39
Harness
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-55
Composite
Light Assemblies . . . . . . . . . . . . 4-25
COMPOSITE LIGHT ASSEMBLIES
This task covers:
b. Lamps, lens, and door assembly
INITIAL SETUP
Materials/Parts
Tools
Lamps (if required)
Preformed packing
Screwdriver, flat-tip
Socket, 9/6-inch, 1/2-inch drive
Personnel Required
Wrench, 9/16-inch, open-end
One
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
NOTE
Removal is not necessary for lamp, lens, or door
assembly replacement. If replacing lamp, lens, or
door assembly only, go to step 6. If wire identification
tags are missing or not readable, wires should be
tagged to aid assembly.
If wire connectors are to be repaired or replaced, go