TM 9-2330-371-14&P
WIRE HARNESS - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
INSTALLATION CONTINUED
Wire harness (3)
Back of left
Pull over main beam (2) to clearance
68.
middle clearance
lights (13) and allow enough slack for
light (13) and
both connections.
mainbeam (2)
Short harness lead goes to left side.
Clamp (15)
Put on.
Wire harness (3)
69.
and reflector
bolt (14)
Lockwasher (16)
Put on and tighten using 3/8-inch socket
Reflector
70.
and nut (17)
bolt (14) and
and handle.
harness clamp (15)
Repeat steps for right middle
clearance light.
11 clamps (19)
Put on.
Wire harness (3)
71.
and 11 studs (18)
11 Iockwashers (20)
Put on and tighten using 7/16-inch socket
11 studs (18)
72.
and nuts (21)
and handle.
and 11 harness
clamps (19)
4-51