TM 9-2330-371-14&P
WIRE HARNESS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
Wire harness (3)
Pull through.
Grommet hole (1)
73.
Be certain that correct wires are
in rear of left
pulled by checking marker tags. If
main beam (2)
unsure, check wiring diagram
(page FO-1).
Four connector
Match wire numbers and connect together.
Left rear
74.
halves (5)
clearance
lights (4)
Six connector
Match wire numbers and connect together.
Wire harness (3)
75.
halves (7)
and composite
light adapter
harness (6)
Clamp (9)
Put on.
Wire harness (3)
76.
and left clearance
light bolt (8)
Lockwasher (10)
Put on and tighten using 3/8-inch socket
Clearance light
77.
and nut (11)
bolt (8) and
and handle.
harness clamp (9)
Three clamps (13)
Put on.
Wire harness
78.
(3) and three
studs (12)
Three nuts (14) and
Three studs (12)
Put on and tighten using 7/16-inch socket
79.
Iockwashers (15)
and three harness
and handle.
clamps (13)
Grommet (16)
Grommet hole (1)
Put on and push into place.
80.
and wire
harness (3)
Wire harness (3)
Right rear main
Pull through.
81.
beam hole (17)
Four connector
Right rear
Match wire numbers and connect together.
82.
halves (19)
clearance
lights (18)
4-52