TM9-2330-371-14&P
AIR LINES AND FlTTINGS(GLADHAND TO EMERGENCY RELAY VALVE) - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION CONTINUED
Wrap threads with two turns teflon
Airhose (2) and
a.
Back of
10.
gladhand (1)
fitting (3)
tape.
b. Put on and tighten using 518-inch
wrench.
Four hose clamps
Put clamps (5) on hose (2) and squeeze
a.
Four studs (4)
11.
(5), nuts (6), and
shut.
and hose (2)
lockwashers (7)
b.
Put clamps (5) on studs (4).
and tighten using 7/16-inch socket and
handle.
Five grommets (9)
Put around hose (2) and press into
Five grommet
12.
hole (2).
holes (8) and
hose (2)
Hose (2) and
a. Lay hose (2) in place along main
Left main frame
13.
grommet (13)
frame (10) under crossmembers (11).
(10), five cross-
b. Feed through grommet hole (12) and put
members (11), and
grommet (13) in place.
grommet hole (12)
13 hose clamps (15),
a. Put clamps (15) on hose (2) and
13 studs (14)
14.
nuts (16), and
squeeze shut.
and hose (2)
lockwashers (17)
b. Put clamps (15) on studs (14).
and tighten using 7/16-inch socket and
handle.
TA224269
4-90