TM 9-2330-371-14&P
ACTION
ITEM
REMARKS
LOCATION
REMOVAL CONTINUED
Nipple (2)
Using 9/16-inch and 1 1/4-inch
Fitting (1)
3.
wrenches, unscrew and take out.
Nut (3),
a. Using 1 1/4-inch wrench and 1 1/2-inch
4.
Iockwasher (4) and
wrench, unscrew and take apart.
b. Remove fitting and tag from gooseneck.
tag (5)
Dummy coupling (7)
If replacement is required, use pliers to
Chain (6)
5.
open one end of S-link (8) and remove.
REPAIR
NOTE
Gladhand repair may be done with gladhand removed
or installed.
Packing ring (10)
a. Pry out with screwdriver.
Gladhand (9)
6.
b. Wipe packing-ring groove (11) clean.
Packing ring (10)
a. Squeeze with fingers to partially
7.
collapse, and insert one end into
groove (11) on gladhand (9).
b. Using screwdriver, push packing ring
flat into groove.
Packing ring must lay flat and free
of twists or bulges.
INSTALLATION
a. Place tag (5) on fitting (1) and place
Fitting (l), tag
Gooseneck (12)
8.
inside gooseneck (12).
(5), nut (3) and
b. Screw on nut (3) with Iockwasher (4)
Iockwasher (4)
and tighten using 1 1/2-inch and
1 1/4-inch wrenches.
a. Wrap both threads two turns counter-
Nipple (2)
Fitting (1)
9.
clockwise with teflon tape.
b. Put in and tighten using 9/16-inch
wrench and 1 1/4-inch wrench.
Put on and tighten using 5/8-inch wrench.
Slip nut (13) and
Nipple (2)
10.
hose (14)