TM9-2330-371-14&P
HUB AND DRUM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
15.
Two bearing cups
Using cup puller/replacer, take out.
(18) and (19)
INSTALLATION
16.
Two bearing cups
Put in place and seat using cup puller/
(18) and (19)
replacer.
17.
Inner bearing (17)
b. Put in place.
18.
New seal (16)
Put in place and seat using hammer and
woodblock.
Do not hit seal directly with hammer.
Be certain seal is firmly seated all
the way around.
Adapter plate (10)
19.
10 bolts (15)
Line up serrations and tap into place
using hammer.
20.
Drum assembly (8)
Put together with bolts (15) through
drum assembly (8).
21.
10 nuts (11),
Put on and tighten using 11/16-inch
socket, extension, and handle.
and inspection
If installing drum only, go to
hole cover (13)
step 24.