TM 9-2330-371-14&P
ACTION
ITEM
REMARKS
LOCATION
REMOVAL- CONTINUED
Two nuts (2),
Using cross-tip screwdriver, socket,
Reflector (1)
3.
Iockwashers (3),
handle, and extension if required, un-
and screws (4)
screw and take off.
Take off.
Reflector (1)
Frame(5)
4.
INSTALLATION
Put on and line up holes.
Reflector (1)
5.
Put in and tighten using cross-tip screw-
Two screws (4),
6.
Frame (5) and
nuts (2), and
driver, socket, handle, and extension if
reflector (1)
Iockwashers (3)
required.
Wire harness
Put on and squeeze together.
Wires (6)
7.
clip (7)
Put on and tighten using wrench.
Wire harness clip
8.
Screw (4)
(7), Iockwasher (8),
and nut (9)
TASK ENDS HERE
TA224311