TM9-2330-372-14&P
TABLE 3-1. OPERATOR TROUBLESHOOTING TABLE-continued
Malfunction
Test or Inspection
Corrective Action
TIRES
11. ABNORMAL TIRE WEAR.
Step 1.
Check tire pressure.
a. If tire pressure is less than 45 psi XM1034 or 75 psi XM1048, inflate tires to correct pressure.
b. If tire pressure is correct psi, proceed to Step 2.
Step 2.
Check for loose, cracked, bent or broken rim or wheel.
a. If wheel stud nuts are loose, tighten nuts.
b. If wheel or rim is cracked or broken, notify organizational maintenance to replace wheel or
rim.
c. If wheel or rim is secure and not cracked or broken, proceed to Step 3.
Step 3.
Check suspension system for damaged rubber bumpers, springs, and loose or missing bolts and
nuts.
a. If suspension system is damaged or has loose or missing bolts and nuts, notify organizational
maintenance.
b. If suspension system is not damaged and all hardware is complete and secure and
malfunction still exists, notify organizational maintenance.
Section III. OPERATOR/CREW MAINTENANCE
Operator/Crew maintenance of the trailer unit is restricted to performing cleaning of electrical connectors, changing a
3-6. CLEANING ELECTRICAL CONNECTORS.
Remove any buildup of dirt or grease from the electrical connectors with a soft cloth (App. E, item 6).
3-10