TM9-2330-374-14&P
110 VOLT DOME LIGHT SWITCH REPLACEMENT
INITIAL SETUP
Tools
General mechanics tool kit
Materials/Parts
1 1 0 volt dome light switch
WARNING
Disconnect all outside power before performing any
maintenance on the electrical system. Failure to do so
could result in serious injury or death.
a.
Removal.
(1) Remove two screws (1, figure 4-12) securing switch face plate (2). Remove
face plate (2).
(2) Remove two screws (3) securing switch (4) to wall box (5).
(3) Pull switch (4) from wall box (5). Loosen two captive screws (6) securing
t w o w i r e s ( 7 ) t o s w i t c h ( 4 ) . T a g and disconnect wires (7), then remove
switch (4).
Removing or installing
Removing
or
installing
Removing o r
installing
switch face plate
switch
wires
110 volt dome light switch replacement