T h e valve stem must be in the groove of the drum to
p r e v e n t damage.
T h e valve stem must be 180 degrees
(2) Install wheel (2) and ten lug nuts (1).
from the valve stem of the inner wheel. Torque lug nuts to 400-450 lb ft
(3) Remove jack stands and lower semitrailer.
( 4 ) Remove chock blocks and stow in brackets.
Refer to TM9-2610-200-24 for tire removal, repair and installation.
B R A K E DRUM HUB
Equipment C o n d i t i o n
T i r e s and w h e e l s removed (para.
G e n e r a l mechanics tool kit and common
s u p p l e m e n t II
six washers (2), hub cap (3) and gasket
( 2 ) Straighten tabs on tongue washer (6). Remove axle nut (5), tongue washer
(6), lockwasher (7) and inner nut (8).
( 3 ) Remove outer bearing cone (9).
( 4 ) Remove hub (11) and brake drum (12).
(5) Remove inner bearing cone (14) and grease seal (13) from spindle.