( 2 ) Remove shim (2) and gasket (3).
D r y cleaning solvent (PD-680) is both toxic and
Avoid prolonged breathing of vapors. A v o i d
skin contact. Use only in a well ventilated area.
Keep away from open flame. F l a s h p o i n t o f s o l v e n t i s
1 3 8 F (59C).
(1) Thoroughly clean the shim (2, figure 4-49) with cleaning solvent (PD-680).
A d h e s i v e MIL-A-5092B,
type I is toxic and flammable.
Use chemical goggles,
gloves and good ventilation.
Keep container closed;
keep sparks, flames and heat
off skin, eyes and clothes. Do
not breathe vapors.
(2) Apply adhesive sealant (MIL-A-5092B, type I) to shim (2).
(4) Position shim (2) with gasket (3) and secure with eight screws (1).