(3) Install spring cap (8) on each side of spring (4).
( 4 ) I n s t a l l t w o u - b o l t s ( 7 ) , four washers (6) and nuts (5) on each side of
s p r i n g ( 4 ) . Torque to 730 lb ft (990 Nm).
(5) Install four bolts (3), washers (2) and nuts (1) to each side of spring
( 4 ) . Torque to 300 lb ft (408 Nm).
Inspect flange on spring seat cap to determine if
socket will fit on bolt.
I t may be necessary to grind
only enough flange so socket will fit over the head of
the bolt properly.
( 6 ) Remove axle and frame supports.