TM 9-2330-376-14&P
4-28. HANDBRAKE MAINTENANCE (Con't).
Loosen two jamnuts (28). Remove turnbuckle (21) and jamnuts from handbrake cable (27).
8.
Unhook spring (24) from handbrake cable (27) and frame.
9.
10.
Remove two nuts (26), bolts (22), and Iockwashers (25). Remove bracket (23). Discard Iockwashers.
WARNING
DO NOT handle brakeshoes, brakedrums, or
other brake components unless area has been
properly cleaned. There may be asbestos dust
on these components which can be dangerous
if you touch It or breathe it. Wear an approved
filter mask and gloves. Never use compressed
air or a dry brush to clean brake components.
Dust may be removed using an industrial-type
vacuum cleaner. Clean dust or mud away from
brake components with water and a wet, soft
brush or cloth. Failure to follow this warning
may result in serious illness or death to
personnel.
Remove hub and brakedrum from wheel assem-
11.
bly of handbrake cable (27) to be removed
4-32