TM 9-2330-376-14&P
5 - 1 . BOGIE ASSEMBLY REPLACEMENT (Con't).
NOTE
Use a drain pan to catch any draining brake
fluid. Clean up all spills.
1.
Disconnect tube assembly (1) from master cylin-
der (2). Repeat for master cylinder on other side of
trailer.
2.
Loosen nut (3) and two nuts (11). Remove turnbuckle (4) from handbrake cable (10).
NOTE
On XM1073 there are two brackets on each side of frame, one for each handbrake
cable.
Remove two nuts (9), lockwashers (8), and bolts (5). Remove bracket (6) from handbrake cable (10) and frame.
3.
Discard Iockwashers.
4.
Remove spring (7) from handbrake cable (10) and frame.
CAUTION
Handbrake cables must be tied up out of way of bogie assembly to prevent cables from
becoming damaged.
Repeat steps 2 through 4 for handbrake cable (10) on other side of trailer. Use tie-down straps to tie handbrake
5.
cables up out of way of bogie assembly.
TA701008
5-2