Table 2-1. Operator/Crew Preventive Maintenance Checks and Services
ITEM TO BE INSPECTED
is not ready/
REAR SUPPORT LEGS
Rear support legs are
a. Inspect rear support legs (63), welds, and attaching/
mounting hardware. Operate handcrank (64) on each
support leg to ensure proper operation without binding.
Ensure protective covers (65) are in place.
b. Check that rear support legs (63) are fully retracted
retracted or tightened.
and the cover closes freely and latches properly.
Socket head screw (66) will be positioned outboard.
2-40 Change 1