DUAL WINCH LOADING AND UNLOADING (CONT)
Make sure that M1070 tractor parking brake is applied. PTO will not engage unless
tractor parking brake is set.
(2) Turn beacon light switch (7) to ON position. With engine idling, set PTO switch (8) to ON.
(3) Loosen handle (43) of snatch block stow clamp (44) and remove snatch block (6) from stowed position off
platform stow pins.
Bearing protection must be worm when near winching station or operating
winches or injury to personnel may result.
(4) Raise guard (9), lock in upright position, and release AUXILIARY WINCH KICKOUT by lifting and rotating
lever (10) counterclockwise.