SINGLE WINCH LOADING AND UNLOADING (U.S.M.C. ONLY) (CONT)
(44) Winch operator must retract and stow winch cable and winching equipment used during this procedure.
Because of the weight of the snatch block and Y-bar straps, two persons are
required when handling the snatch block and Y-bar straps or injury to personnel
(45) Using two people, remove pin (5), nut (6), bolt (7), and snatch block (2) from two Y-bar straps (8).
(46) Remove two shackles (9) and two Y-bar straps (8) from payload upper recovery eyes (10).
2-200 Change 1