3-9. INNER/OUTER WHEEL (CONT)
The bogie must be rotated outward from its normal position so that the linkage
attaching point is outboard of the platform edge or damage to the hydraulic and/or
pneumatic lines may result.
Start to turn bogie outboard away from center of platform. Be sure that no sharp bends, kinks, or excess strain
exist on two hydraulic lines and air brake lines routed to affected bogie.
Do not turn bogie more than 90 degrees outboard from center of platform or
damage to hydraulic and/or pneumatic lines may result.
Continue to turn bogie (5) until bogie linkage attaching point is outboard of the platform edge and the bogie axle
(10) is parallel with that side of platform, not to exceed 90 degrees from original forward position.