COMPOSITE MARKER LIGHT (CONT)
Install LED (14), LED (13), bulb (12), and bulb (11) into composite marker light (4).
Install gasket (10) and light lens (9) onto composite marker light (4). Secure by tightening six captive screws (8).
Torque six screws (8) to 20 -25 lb-in. (2.2 -2.7 Nm).
Aline and install mounting bracket (7) to composite marker light (4). Secure mounting bracket (7) using two
Aline and install composite marker light (4) to platform and secure with two screws (3) and locknuts (2).
Using semitrailer electrical schematic (figure FO-1) as a guide, reconnect four electrical connectors (1) to W2
Reconnect intervehicular electrical cable, turn on tractor/semitrailer lights, and check composite marker light for proper
VEHICULAR BAR LAMP
This task covers:
General mechanics tool kit, item 16, appx. B
Electrical repair kit, item 18, appx. B
Semitrailer parked on level ground, parking brakes applied, and intervehicular cables disconnected (para. 2-24)
4-106 Change 3