Using a 0.015-inch blade, on 20-blade feeler gage set, inserted into smaller bore of upper suspension arm (5),
carefully adjust position of lip of bearing oil seal up onto small end of shouldered shaft (21).
If shouldered shaft is driven with excessive force, damage to the seals may result.
Drive shouldered shaft (21) until smaller end extends through bearing oil seal and upper suspension arm (5) bore.
Using a 1-1/2-inch socket, 3/4-inch drive ratchet, 1-1/2-inch combination wrench, and two people, install two
access covers (20), capscrew (19), and locknut (18) to upper and lower suspension arms (5 and 17).