TM 9-2330-381-14
General Instructions
CAUTION
All fittings and openings must be capped or plugged immediately after opening to
prevent dirt, moisture, or foreign material from entering the platform pneumatic
system or damage to equipment may result.
NOTE
This procedure is for removal/installation of all platform pneumatic components.
Perform this procedure or any portion of this procedure, as required, to complete
the necessary repair.
Nonmetallic hoses are all manufactured items and are addressed in appendix F.
The following procedure calls out removal/installation of associated pneumatic
fittings only. Use the pneumatic schematic (figure FO-2) as a general guide for
hose routing.
Change 1 4-217