When ramps are lowered and are near the horizontal position, the springs are fully
compressed and under extreme pressure. Do not attempt to adjust or remove
spring mechanism unless ramps are in the raised (stow) position or serious injury
to personnel may result.
The procedures for removal/installation of either the curbside or streetside ramps
are identical. This procedure represents the curbside ramp. To remove only the
ramp spring and associated components, perform steps 1 thru 8.
Open snap (1) and load binder (1.1) of chain assembly (2) and remove chain hook from hole (3) in platform.
Attach chain hook in hole on ramp lift lever (4).
Change 3 4-293