SPARE WHEEL CARRIER
This task covers:
General mechanics tool kit, item 16, appx. B
Gloves, chemical and oil protective, item 17, appx. B
Goggles, industrial, item 17, appx. B
Detergent, general purpose, item 8, appx. E
Cleaning compound solvent, item 25, appx. E
Cotter pin (4)
Washer (8) and as required
Personnel Required: 2
General Safety Instructions
When on top of gooseneck, always hold guardrail with one hand to avoid falling
and causing injury to personnel.
Remove four cotter pins (1), slotted nuts (2), eight washers (3), and four capscrews (4). Discard cotter pins.
Unhook davit winch cable (5) from stow point on davit base (6).
Release linch pin (7) and remove hitch pin (8) from pulley clamp (9) and reposition pulley clamp on davit arm (10)
near davit winch (11). Insert hitch pin (8) and secure with linch pin (7).
Release linch pin (12) and remove hitch pin (13) at davit base (6) and swing davit arm (10) and winch (11) over
spare wheel carrier (14).
Attach winch cable (5) to spare wheel carrier (14) by wrapping cable under wheel supports and attaching hook
over cable to form a loop.
4-308 Change 1