FRONT SUPPORT LEGS (CONT)
The inner tube and foot weldment are heavy. Use two people to support and move
the assembly or injury to personnel may result.
Place inner tube assembly (5) under support tube (3). Insert anchor (6) and strap (7) through slot in inner tube
assembly (5). Raise inner tube assembly (5) and aline with support tube (3). Turn handcrank (4) clockwise to
raise inner tube assembly (5).
If required, assemble handle (3.3), washer (3.2), and nut (3.1) to pin (3.4).
When holes are alined, install latch pin (2) and turn to lock in place. Install linch pin (1) to secure latch pin.
REAR SUPPORT LEGS
This task covers:
General mechanics tool kit, item 16, appx. B
Screw threading set, tap and die, item 18, appx. B
Jack, hydraulic floor, item 18, appx. B
The following tools can be found in common tool kit no. 1, item 17, appx. B:
Hammer, 3 lb
Wrench set, socket, 3/4" dr
Degreaser tank, 20 gl
Gloves, chemical and oil protective
Detergent, general purpose, item 8, appx. E
Cleaning compound solvent, item 25, appx. E
Personnel Required: 2
4-316 Change 2